Home Up Feedback Contents Search

  Now Engineering     

 
Products
Contact Us
Search
Instruction Sheets
Literature Cut Sheets
Home
 
 
 

Sink Proportioners

Model 1502 Model 1501
The Model 5102 SINK PROPORTIONING SYSTEM takes the guess work out of hand dishwashing. It is designed for use over three compartment sinks. It quickly and accurately dispenses a dishwashing detergent in one compartment and/or a sanitizing rinse in another. No more wasting detergent because of over use. No more worries that utensils are not sanitized properly because of under use of product. Two Quarter-turn ball valves and chemical proportioners are mounted inside a stainless steel case. It provides an accurate means of automatically dispensing your products at the correct dilutions. Color coded metering tips control the feed rates. Since the products are correctly diluted they produce the optimum results. The Model 5101 SINK PROPORTIONING SYSTEMS take the guess work out of hand dishwashing. It is designed for use over three compartment sinks. It quickly and accurately dispense a dishwashing detergent or sanitizer in one compartment.  No more wasting chemical because of over use. No more worries that utensils are not sanitized properly because of under use. one Quarter-turn ball valve and a chemical proportioner is mounted inside a stainless steel case. It provides an accurate means of automatically dispensing your products at the correct dilutions. Color coded metering tips control the feed rates. Since the products are correctly diluted they produce the optimum results.

FEATURES

1) Easy to Use Ball Valves, No Small Buttons to Press and Turn
2) Sturdy Stainless Steel Case
3) Molded Plastic Proportioner for Long Life and Low Maintenance
4) Color Coded Metering Tips to Precisely Meter the Chemical Induction Rate

SPECIFICATIONS:
PRESSURE RATING:           125 PSI MAX
TEMPERATURE RATING:     160 o F
FLOW RATE:                    4 GPM AT 40 PSI
INDUCTION RATE:            ¼ TO 12 OZ/GAL

 

Home ] Up ]

Send mail to now-engineering@sbcglobal.net with questions or comments about this web site.
Last modified: 03/30/07